📋Warranty Info

• New Perodua vehicles typically come with a 5‑year or 150,000 km warranty, whichever occurs first starting from the date of registration. This covers defects in materials or workmanship and applies to major components like the engine, transmission, electrical system, suspension, and more.

• At the same time, a basic warranty or minor components—which may include wear-and-tear items—are often covered under different terms. According to CompareHero.my, the basic warranty coverage may be around 3 years / 100,000 km, while major parts are covered under 5 years / 150,000 km
  * Subject to Term & Condition.

📋 Step-by-Step Instructions

1. Find the Recommended Tire Pressure

• Look for a sticker inside the driver’s door frame, or check your car manual.

• For most Perodua models (like Axia, Myvi, Bezza), it’s usually around:

  • Front tires: ~230 kPa (33 psi)

  • Rear tires: ~220 kPa (32 psi)

Always check the cold tire pressure — before driving or after the car has been parked for 3+ hours.

 

2. Remove the Valve Cap

• Unscrew the small cap on the air valve of your tire (keep it safe — you’ll need it after).

3. Check the Pressure with a Gauge

• Press the gauge firmly onto the valve stem until you hear a short hiss.

• Read the pressure value from the gauge:

  • Digital gauge: displays immediately

  • Analog gauge: needle will point to the pressure

4. Adjust the Pressure if Needed

• If the tire pressure is too low:

  • Use an air pump to fill the tire. Press the nozzle on the valve and add air in short bursts.

• If it’s too high:

  • Press the valve core slightly (some gauges let you do this) to release air slowly.

5. Replace the Valve Cap

• Screw it back on tightly to keep out dust and moisture.